@
Dish TV firmware v 2.13.1.40
Signal lock : Yes
Signal Strength : 57%
Signal quality : 78%
Signal frequency : 12644/ Horizontal / 27500
12688Mhz 27500 kbps Verical (Home transponder)
Others are available @40.7 MBps
I am a Dishtv subscriber using KAON STB model no. KSC-100MCO and The software that is currently running on almost all Set Top Box is very secure and is not easy to hack..
It uses NSS-6 satellite to broadcast channels. It has 35 HD channel in its platform and more than 250 SD channel.
You first have to downgrade the Firmware of the DishTV using RSV Cable. You can do it by going to Menu > Setup > Utility
The Dishtv Utilty Password is 86427531. After entering Utility password, you will gain access to upgrade or downgrade the firmware.
i am not going to give you a link to download. Search on torrents and rapidshare, you will find one. Now if you have BOX, you can downgrade to firmware easily.
Now i will update this thread more when i will have time..
First,supply ON the power of
STB and set the channel to be
view than short the chip (RAM)
with screw driver or any conducting
metal, pin's at @ (pic.)
It will hang the processing of SET OF BOX further. You can't change anything from your Remote and STB
itself...!!
Due to undesirable addressing
occurred by shorting chip it will hang STB working (only the external device like remote and push on/off switches of STB).
Repeat, This process again and
again for viewing other
channel.
Signal lock : Yes
Signal Strength : 57%
Signal quality : 78%
Signal frequency : 12644/ Horizontal / 27500
12688Mhz 27500 kbps Verical (Home transponder)
Others are available @40.7 MBps
I am a Dishtv subscriber using KAON STB model no. KSC-100MCO and The software that is currently running on almost all Set Top Box is very secure and is not easy to hack..
It uses NSS-6 satellite to broadcast channels. It has 35 HD channel in its platform and more than 250 SD channel.
You first have to downgrade the Firmware of the DishTV using RSV Cable. You can do it by going to Menu > Setup > Utility
The Dishtv Utilty Password is 86427531. After entering Utility password, you will gain access to upgrade or downgrade the firmware.
i am not going to give you a link to download. Search on torrents and rapidshare, you will find one. Now if you have BOX, you can downgrade to firmware easily.
Now i will update this thread more when i will have time..
First,supply ON the power of
STB and set the channel to be
view than short the chip (RAM)
with screw driver or any conducting
metal, pin's at @ (pic.)
It will hang the processing of SET OF BOX further. You can't change anything from your Remote and STB
itself...!!
Due to undesirable addressing
occurred by shorting chip it will hang STB working (only the external device like remote and push on/off switches of STB).
Repeat, This process again and
again for viewing other
channel.
DishTV satellite
NSS 6 at 95.0°E
NSS 6 at 95.0°E
DishTV HD satellite
AsiaSat 5 at 100.5°E
AsiaSat 5 at 100.5°E
4 Banks x 2M x 16bits Synchronous DRAM
@
After so many request form viewer's, How to setup Satellite reception. here i will tell all basic step.
For a new guy in this field..............!!
1. First find your local latitude and longitude.
2. Buy a cheap magnetic needle, easily available in market.
set 0* degree to north then rotate dish.
3. How much to rotate and elevate Dish:-
There are many method like check online or in
STB itself.
Set LNB ku band frequency at 9750 or 10600 Mhz
( low ku band and hi ku band frequency )
4. This is the main setup, fix your dish at solid place
beware that there should not be any obstacle
between satellite and dish.
5. Last step, add all frequency details in STB and adjust
dish to receive maximum signal strength.
If signal remain weak then rotates your LNB
( feed horn) this is also called skew angle .
For a new guy in this field..............!!
1. First find your local latitude and longitude.
2. Buy a cheap magnetic needle, easily available in market.
set 0* degree to north then rotate dish.
3. How much to rotate and elevate Dish:-
There are many method like check online or in
STB itself.
Set LNB ku band frequency at 9750 or 10600 Mhz
( low ku band and hi ku band frequency )
4. This is the main setup, fix your dish at solid place
beware that there should not be any obstacle
between satellite and dish.
5. Last step, add all frequency details in STB and adjust
dish to receive maximum signal strength.
If signal remain weak then rotates your LNB
( feed horn) this is also called skew angle .
No comments:
Post a Comment